GDM-834X Series User Manual
116
CONFigure Commands
CONFigure:VOLTage:DC
Sets measurement to DC Voltage on the first display and
specifies the range.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF)]
Example: CONF:VOLT:DC 5
Sets the voltage range to 5 volts.
CONFigure:VOLTage:AC
Sets measurement to AC Voltage on the first display and
specifies the range.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF)]
Example: CONF:VOLT:AC
Sets the AC range to auto range.
CONFigure:VOLTage:DCAC
Sets measurement to DC+AC Voltage on the first display and
specifies the range.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF)]
Example: CONF:VOLT:DCAC
Sets the DC+AC voltage range to auto range.
CONFigure:CURRent:DC
Sets measurement to DC Current on the first display and
specifies the range.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF)]
Example: CONF:CURR:DC 50e-3
Sets the DC current range to 50mA.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
