GW Instek GDM-8342 - Reading Indicator; Automatic;Manual Triggering

GDM-834X Series User Manual
32
Reading Indicator
Overview
1. The reading indicator next to the 1st display
flashes according to the refresh rate setting.
V
Automatic/Manual Triggering
Overview
By default, the GDM-8342/8341 automatically
triggers according to the refresh rate. See the
previous page for refresh rate setting details.
The TRIG key is used to manually trigger
acquisition when the trigger mode is set to EXT.
Manual Trigger
1. Press SHIFT+TRIG to toggle the trigger mode
to EXT.
2. Press the TRIG key to manually trigger each
measurement when in EXT trigger mode.
Note
Manual triggering is not supported for capacitance
measurements.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com