OPERATION
33
AC/DC Voltage Measurement
The GDM-8342/8341 can measure from 0 to 750VAC or 0 to
1000VDC, however the CATII measurement is only rated up to
600V.
Set to ACV/DCV
Measurement
1. Press the DCV or ACV key to measure DC or
AC voltage.
For AC + DC voltage, press the ACV and DCV
keys at the same time.
2. The mode will switch to AC, DC or AC+DC
mode immediately, as shown below.
AC & DC
indicator
Voltage
units
Measurement
range
V
SDC
AC
Connect the test lead between the V and the
COM terminal. The display updates the
reading.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
