GW Instek GDM-8342 - Configure2:Frequency; Configure2:Function; Configure2:Off; Configure2:Period

COMMAND OVERVIEW
121
CONFigure2:FREQuency
Sets measurement to Frequency on the second display and
specifies the range.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF)]
Example: CONF2:FREQ MAX
Sets the frequency measurement range to max on the second
display.
CONFigure2:PERiod
Sets measurement to Period on the second display and specifies
the range.
Parameter: [None] | [Range(<NRf> | MIN | MAX | DEF)]
Example: CONF2:PER
Sets the DMM to period measurement using the previous range.
CONFigure2:OFF
Turns the second display function off.
Parameter: None.
CONFigure2:FUNCtion?
Returns the current function on the second display.
Return parameter: VOLT, VOLT:AC, CURR, CURR:AC, RES,
FREQ, PER, NON
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com