GDM-834X Series User Manual
80
Frequency/Period Input Jack Settings
The INJACK settings set which input terminal is used for frequency
or period measurements.
1. Press the MENU key.
2. Go to MEAS on level 1.
3. Go to INJACK on level 2.
4. Set the INJACK setting to either VOLT, 500mA
or 10A.
5. Press the Enter key to confirm.
6. Press the EXIT key to exit from the INJACK
menu.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
