GW Instek GDM-8342 - Temperature Measurement

OPERATION
53
Temperature Measurement
The GDM-8342 can measure temperature using a thermocouple. To
measure temperature, the DMM accepts a thermocouple input and
calculates the temperature from the voltage fluctuation. The
thermocouple type and reference junction temperature are also
considered. Temperature measurement is only supported on the
GDM-8342.
Range
Thermocouple:
-200°C ~ +300°C
Procedure
To make temperature measurements, press
SHIFT → Hz/P (TEMP).
The temperature mode appears showing the
temperature on the primary display and the
type of sensor on the secondary display.
Display
C
S
Measurement
Temp.
units
Sensor type
Connection
Connect the sensor lead between the VΩ
terminal and the COM terminal. The display
updates the reading.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com