GW Instek GDM-8342 - Replacing the AC Source Fuse

APPENDIX
145
Replacing the AC Source Fuse
Fuse Ratings
Type
Rating
0.125AT
100VAC, 120VAC
0.063AT
220VAC, 240VAC
Note
Only replace the fuse with a fuse of the correct type
and rating.
Steps
1. Turn the DMM off and take out the power cord.
2. Remove the fuse socket using a flathead
screwdriver.
3. Remove the fuse in the holder and replace with
the correct type and rating.
4. Ensure the correct line voltage is lined up with
the arrow on the fuse holder. Insert the fuse
socket.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com