GW Instek GDS-1000A-U Series - Saving the Display Image

GDS-1000A-U Series User Manual
118
Saving the display image
Background
Saving the display image can be used as a screen
capture or it can be used as a reference waveform.
Procedure
1. Insert the USB flash drive
into the front panel USB
port. (Image files can only
be saved to USB)
2. Press the Save/Recall key
twice to access the Save
menu.
Save/Recall
Save/Recall
3. Press Save Image.
Save
Image
4. Press Ink Saver repeatedly to
invert the background color
(on) or not (off).
Ink Saver
Off
5. Note: Destination is set as
USB. This cannot be
changed.
Destination
USB
6. Press Save to confirm
saving. When completed, a
message appears at the
bottom of the display.
Save
Note
The file will not be saved if the
power is turned off or the USB flash
drive is removed before completion.
File utilities
To edit the USB drive contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page 110.
File
Utilities