GW Instek GDS-1000A-U Series - Go No-Go Testing; Overview

GDS-1000A-U Series User Manual
66
10. To move the FFT/FFT rms
waveform horizontally,
press Zoom repeatedly until
Hz is selected. Use the
Variable knob to change the
horizontal position.
Zoom
1X
0.0000Hz
VARIABLE
Range
0~50.000MHz
11. To clear the FFT result from
the display, press the Math
key again.
M
A
TH
Go No-Go Testing
Overview
Background
Go-NoGo testing checks if a waveform conforms to
a user-specified maximum and minimum
boundary (template). The testing can be set to stop
or continue each time the template has or has not
been violated by the input waveform.
Settings
Item
Default
Details
NoGo criteria: When inside
or outside the boundary
Inside
Page 67
Source
Channel 1
Page 67
Test continue or stop when
NoGo occurs
Stop
Page 68
Boundary (template) –
selects the minimum and
maximum boundaries
(template) from a single
waveform
Auto (0.4%)
Page 68
Run Tests
Page 72