X-Y mode is split into two windows. The top window
shows the signals over the full time range. The bottom
window shows XY mode.
To move the X Y waveform position,
use the vertical position knob:
Channel 1 knob moves the X Y
waveform horizontally, Channel 2
knob moves the X Y waveform
vertically. Similarly, the X2 and Y2
axis can be positioned using the
channel 3 and channel 4 vertical
position knobs.
The horizontal position knob and
Time/Div knob can still be used
under the XY mode.
To Next Page
Loading...
