GW Instek GDS-3000 Series - Using Advanced Delay Trigger

GDS-3000 Series User Manual
134
5. To Delay by Time, press Time from
the side menu and set the delay
time.
Range
10ns ~ 10s (by time)
Set to minimum
6. To Delay by Event, press Event
from the side menu and set the
number of events.
Range
1 ~ 65535 events
Set to Minimum
Using Pulse Width Trigger
Panel Operation
1. Press the trigger Menu key.
Menu
2. Press the Type key from the lower
bezel menu.
3. Select Pulse Width from the side
menu. The pulse width trigger
indicator appears at the bottom of
the display.
From left: external source, polarity, when
4. Press Source from the lower bezel.