GW Instek GDS-3000 Series - Display; Display Waveform as Dots or Vectors

GDS-3000 Series User Manual
106
Set the Level of Persistence
Background
The persistence function allows the GDS-3000 to
mimic the trace of a traditional analog oscilloscope.
A waveform trace can be configured to “persist”
for designated amount of time.
Panel Operation
1. Press the Display menu key.
Display
2. To set the persistence time, press
the Persistence menu button on the
bottom bezel.
3. Use the variable knob to select a
persistence time.
Time
Auto, 100ms~10s, Infinite, VPO Off
Clear
To clear persistence, press Clear
Persistence.
Set the Intensity Level
Background
The intensity level of a signal can also be set to
mimic the intensity of an analog oscilloscope by
setting the digital intensity level.
Panel Operation
1. Press the Display menu key.
Display
2. Press Intensity from the bottom
menu.