GW Instek GDS-3000 Series - Probe Specifications

GDS-3000 Series User Manual
202
Common Probe Specifications
Position x 10
Attenuation Ratio
10:1 (fixed) with readout pin
Input Resistance
10MΩ when used with 1MΩ input
oscilloscope
Maximum Input
Voltage
500V CAT I, 300V CAT II
derating with frequency
Operating
Condition
Temperature
–0°C ~ 50° C
Relative Humidity
≤85% @35°C
Safety Standard
EN61010-031 CAT II