GW Instek GPE-1326 Series - Overview; Introduction

GPE-1326/2323/3323/4323 Series User Manual
10
OVERVIEW
This chapter describes the GPE-1326/ 2323/ 3323/
4323 series in a nutshell, including its main
features and front/ rear panel introduction. After
going through the overview, follow the Setup
chapter (page 25) to properly power up and set
operation environment.
Introduction
Overview
The GPE-1326/2323/3323/4323 series regulated
DC power supply series are light weight,
adjustable, multifunctional work stations. The
GPE-1326 has a single independent adjustable
voltage output (Coarse and fine). The remote
voltage compensation function is activated for
large changes in current output. The GPE-2323 has
a 2 independent adjustable voltage outputs. The
GPE-3323 has three independent outputs: two with
adjustable voltage levels and one with fixed level
5V. The GPE-4323 has four independent voltage
outputs that are all fully adjustable. The series can
be used for logic circuits where various output
voltage or current are needed, and for tracking
mode definition systems where plus and minus
voltages with insignificant error are required.