GW Instek GPE-1326 Series - Set the Displayed Digit Resolution for the Voltage;Current

GPE-1326/2323/3323/4323 Series User Manual
30
Panel operation
1. Press and hold the Output key and
turn on the power until the On or
OFF icon flashes on the LCD
display.
  
2. Press the “Set View” key to select.
 
3. Press the “ON/OFF” key to
confirm.
  
Note
By default the output is set to OFF at startup.
Set the displayed digit resolution for the
voltage/current
Background /
Connection
The GPE-1326/2323/3323/4323 series can set the
displayed digit resolution for the voltage and
current settings/readings to 3 or 4 digits at startup.
Panel operation
1. Press and hold the "Set View"
key and turn the power until on
the decimal point for the CH1
voltage flashes on the LCD
display.
 
2. Press the “Set View” key to
select the number of displayed
digits.
 
3. Press the “ON/OFF” key to
confirm the selection.
  
Note
By default the number of displayed digits is set to
four.