GW Instek GPE-1326 Series - Safety Instructions

SAFETY INSTRUCTIONS
7
Fuse
WARNING
 Fuse type:
100V/120V: T6.3A/250V
220V/230V: T3.15A/250V
 Make sure the correct type of fuse is installed
before power up.
 To ensure fire protection, replace the fuse only
with the specified type and rating.
 Disconnect the power cord before fuse
replacement.
 Make sure the cause of fuse blowout is fixed
before fuse replacement.
Cleaning the
device
 Disconnect the power cord before cleaning.
 Use a soft cloth dampened in a solution of mild
detergent and water. Do not spray any liquid.
 Do not use chemicals or cleaners containing
harsh products such as benzene, toluene, xylene,
and acetone.
Operation
Environment
 Location: Indoor, no direct sunlight, dust free,
almost non-conductive pollution (note below)
 Relative Humidity: < 80%
 Altitude: < 2000m
 Temperature: 0°C to 40°C