GW Instek GPE-1326 Series - Page 43

OPERATION
43
3. Use the CH1 voltage and
current knobs to set the
output voltage and current.
CH2 control function is
disabled.


4. Press the Output key to turn
on the output. The Output
key will be lit.
  
5. The operating mode of CH2
will appear as the CC icon
on the LCD display.
6. Refer to the CH1 meter and indicator for the
output level and CV/CC status.
Output voltage
level
The CH1 meter reading shows
the output voltage.
Output current
level
Double the amount of CH1
current meter reading.