GSP-9300 Quick Start Guide
28
Power Down
The GSP-9300 has two methods to power
down: Normal and Forced Power Down.
The normal power down method will save the
system state and end any running processes.
The state is saved for the next time the
instrument is turned back on.
The forced power down method only does a
minimum state save.
Press the power button. The system will
automatically handle the power down
procedure in the following order:
The system state is saved.
Outstanding processes are closed in
sequence.
The LCD backlight is turned off.
The system enters standby mode (the
power key changes from orange to
blue).
The process takes ~10 seconds.
Press and hold the power button for ~4
seconds until the system turns off and the
power button turns blue.
The forced power down mode might cause the
GSP-9300 to perform a longer system check the
next time it is powered up.
To Next Page
Loading...
Need help?
General
