EasyManua.ls Logo

GW Instek GSP-9300 - Page 57

GW Instek GSP-9300
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
APPENDIX
55
Tracking Generator
5
(Optional)
Frequency Range
100 kHz to 3 GHz
Output Power
-50 dBm to 0 dBm in 0.5 dB steps
Absolute Accuracy
± 0.5 dB
@160 MHz, -10 dBm,
Source attenuation 10
dB, 20 to 30°C
Output Flatness
Referenced to 160 MHz, -10 dBm
100 kHz to 2 GHz
± 1.5 dB
2 GHz to 3 GHz
± 2 dB
Output Level
Switching
Uncertainty
± 0.8 dB
Referenced to -10 dBm
Harmonics
< -30 dBc
Typical, output level = -
10 dBm
Reverse Power
+30 dBm max.
Connector type
N-type female
Impedance
50 ohm
Nominal
Output VSWR
< 1.6:1
300 kHz to 3 GHz,
source attenuation ≥
12 dB
[5] The minimum RBW filter is 10kHz when the TG output is ON.
USB Power Sensor (Optional)
Type
Average power sensor
Model: PWS-06
Interface to Meter
USB cable to GSP9300 Front-Panel USB Host
Connector Type
N-type male, 50 ohm nominal
Input VSWR
1.1: 1
Typical
1.3: 1
Max
Input Frequency
1 to 6200 MHz
Sensing Level
-32 to +20 dBm
Max. Input
Damage Power
≤ 27 dBm

Other manuals for GW Instek GSP-9300

Related product manuals