GW Instek LCR-6002 - Measure Key Operations; MEAS DISPLAY Page Settings

Overview
20
Figure 2-1 Disk Ready
If the keypad is not needed to enter a numeric value, a
screenshot of the meter’s LCD display can be captured
and saved to the USB disk by depressing the Enter key. If
the screen shot is saved successfully, “Screen saved.” will
be shown in the message area at the bottom of the
screen. The location and name of the screenshot will also
be shown, for example: F:\LCR-
6300\Screen\ScreenShot001.bmp.
Figure 2-2 Screen Saved
2.6.2 DC Bias Voltage
0V ~ ±2.5V
Accuracy: ±0.5%+0.005V