PSM-SERIES PROGRAMMABLE POWER SUPPLY
USER MANUAL
36
2) The setting and store of very group of data:
A group setting includes the Output range, Output voltage value,
Output current value, Over Voltage protection level, Over
Current protection level, Over Voltage status (ON/OFF), and
Delay time. User can proceed the setting and store it to the
memory bank group by group up to 100 groups maximum.
3) Recall range setting (Auto running operation range):
Regarding the setting description, please refer to AUTO RANGE
operation.
4) Enter AUTO mode by pressing [AUTO], now, the operation is in
the auto running function by pressing [OUTPUT].
5) Under this mode, press [SHIFT][AUTO INFO] can monitor the
current operation setting address and operation time.
PSM-SERIES PROGRAMMABLE POWER SUPPLY
USER MANUAL
37
z The flow chart of the Auto Running Operation
To Next Page
Loading...
