29
For more information about IRF port binding requirements, see Virtual Technologies Configuration
Guide.
Examples
# Bind Ten-GigabitEthernet 1/0/1 to IRF-port 1/1 on IRF member 1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] shutdown
[Sysname-Ten-GigabitEthernet1/0/1] quit
[Sysname] irf-port 1/1
[Sysname-irf-port1/1] port group interface ten-gigabitethernet 1/0/1
[Sysname-irf-port1/1] quit
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] undo shutdown
Related commands
irf-port
To Next Page
Loading...
