H3C MSR 810 - Display Sriov

10
Field
Description
pciaddr PCI address of the PF interface.
macaddr MAC address of the NIC.
Related commands
vm network-mode
display sriov
Use display sriov to display NIC information in SR-IOV share mode.
Syntax
display sriov
Views
Any view
Predefined user roles
network-admin
Usage guidelines
Make sure the physical NIC network mode is SR-IOV share when you use this command.
Examples
# Display NIC information in SR-IOV share mode.
<Sysname> display sriov
PF VF vlan pciaddr macaddr
-------------------------------------------------------------------------
0 0 - 0000:03:10.0 00:10:11:10:58:7a
0 1 - 0000:03:10.2 00:10:11:10:58:7b
0 2 - 0000:03:10.4 00:10:11:10:58:7c
0 3 - 0000:03:10.6 00:10:11:10:58:7d
0 4 - 0000:03:11.0 00:10:11:10:58:7e
0 5 - 0000:03:11.2 00:10:11:10:58:7f
0 6 - 0000:03:11.4 00:10:11:10:58:80
0 7 - 0000:03:11.6 00:10:11:10:58:81
Table 2 Command output
Field
Description
PF PF ID of the physical NIC.
VF VF ID of the vNIC.
vlan VLAN to which the vNIC belongs.
pciaddr PCI address of the vNIC.
macaddr MAC address of the vNIC.