H3C MSR 810 - Delete Sriov VM

7
Syntax
delete disk vm vm-name target target
Views
VMM view
Predefined user roles
network-admin
Parameters
vm-name: Specifies a VM by its name. The vm-name argument is a case-sensitive string of 1 to 30
characters.
target target: Specifies a disk or CD-ROM by its drive name. The target argument is a
case-sensitive string of three characters.
Usage guidelines
If you use this command on a running VM, you must restart the VM for the configuration to take effect.
If you use this command on a stopped VM, the configuration takes effect after you start the VM.
Removing a disk or CD-ROM from a VM does not delete the disk or delete the image files uploaded
by the CD-ROM. To release storage space, you must use the
delete command to manually delete
the disk or the image files. For more information, see file system management in Fundamentals
Configuration Guide.
Examples
# Remove disk hdb from VM centos7.
<Sysname> system-view
[Sysname] vmm
[Sysname-vmm] delete disk vm centos7 target hdb
delete sriov vm
Use delete sriov vm to remove an SR-IOV NIC from a VM.
Syntax
In passthrough mode:
delete sriov vm vm-name pf pfid
In SR-IOV share mode:
delete sriov vm vm-name pf pfid vf vfid
Views
VMM view
Predefined user roles
network-admin
Parameters
vm-name: Specifies a VM by its name. The vm-name argument is a case-sensitive string of 1 to 30
characters.
pf pfid: Specifies a physical NIC by its PF ID. The value for the pfid argument is 0.
vf vfid: Specifies a vNIC by its VF ID. The value range for the vfid argument is 0 to 7.