EasyManua.ls Logo

H3C MSR 810 - VM Commands; Add Cdrom VM

H3C MSR 810
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
VM commands
This feature is supported only on the following MSR routers:
MSR3610-I-DP.
MSR3610-I-XS.
MSR3610-IE-DP.
MSR3610-IE-XS.
MSR3610-IE-ES.
MSR3610-IE-EAD.
To ensure correct operation of VMs, make sure the storage medium where the VMs are installed has
sufficient storage space.
If removable hard disks or USB flash drives are used, make sure their file system format is EXT4.
add cdrom vm
Use add cdrom vm to add an operating system image or driver image to a VM.
Syntax
add cdrom vm vm-name cdrom-file cdrom-file
Views
VMM view
Predefined user roles
network-admin
Parameters
vm-name: Specifies a VM by its name. The vm-name argument is a case-sensitive string of 1 to 30
characters.
cdrom-file cdrom-file: Specifies the image file path. The cdrom-file argument is a
case-sensitive string of 1 to 63 characters. The file must be an .iso file.
Usage guidelines
The device supports a maximum of four CD-ROMs. CD-ROMs can contain operating system image
files or hardware driver image files.
The CD-ROMs and IDE disks share drive names hda, hdb, hdc, and hdd. When you add a
CD-ROM or IDE disk to a VM, the VM randomly assigns a drive name to the CD-ROM or IDE disk.
If you use this command on a running VM, you must restart the VM for the configuration to take effect.
If you use this command on a stopped VM, the configuration takes effect after you start the VM.
Before using a newly added CD-ROM, specify a boot order number for it. CD-ROMs that contain
operating system image files always have higher boot priority that those containing hardware driver
image files. The same type of CD-ROMs boot according to the priority of their boot order numbers.
If you do not change the boot disk or uninstall the images of a CD-ROM after the CD-ROM is
installed, the CD-ROM will no longer be used for booting.
When a VM is deployed, the VM automatically assigns a boot order number of 8 to the CD-ROM that
contains the operating system image file. To replace the operating system images, perform the
following operations:
1. Add a new CD-ROM that contains the new operating system image file.

Related product manuals