H3C MSR 810 - Display Vminterface

16
Syntax
display vmdisk-usage vm vm-name
Views
Any view
Predefined user roles
network-admin
Parameters
vm-name: Specifies a VM by its name. The vm-name argument is a case-sensitive string of 1 to 30
characters.
Usage guidelines
Use this command only for a running VM.
To view actual storage usage of a VM, use VNC Viewer to access the VM.
Examples
# Display disk usage information about VM centos7.
<Sysname> display vmdisk-usage vm centos7
Target Capacity(KB) Blk-Used(KB) Usage
------------------------------------------------------------
hda 32212254720 4659224576 14%
hdc 4148080640 4148084736 100%
Table 7 Command output
Field
Description
Target Disk drive name.
Capacity Raw disk capacity, in KB.
Blk-Used Amount of used raw storage, in KB.
Usage Disk usage in percentage.
display vminterface
Use display vminterface to display network interface information for a VM.
Syntax
display vminterface [ vm vm-name ]
Views
Any view
Predefined user roles
network-admin
Parameters
vm-name: Specifies a VM by its name. The vm-name argument is a case-sensitive string of 1 to 30
characters. If you do not specify a VM, this command displays network interface information for all
VMs.