H3C MSR 810 - Display Passthrough

9
Syntax
display comware-memory
Views
Any view
Predefined user roles
network-admin
Usage guidelines
This command is supported only on the following MSR routers:
•
MSR3610-I-DP.
•
MSR3610-I-XS.
•
MSR3610-IE-DP.
•
MSR3610-IE-XS.
Examples
# Display the minimum amount of physical memory available for the Comware system.
<Sysname> display comware-memory
Current comware reserved memory size is 3GB.
Next comware reserved memory size is 2GB.
Related commands
set comware-memory
display passthrough
Use display passthrough to display NIC information in SR-IOV passthrough mode.
Syntax
display passthrough
Views
Any view
Predefined user roles
network-admin
Usage guidelines
Make sure the physical NIC network mode is passthrough when you use this command.
Examples
# Display NIC information in SR-IOV passthrough mode.
<Sysname> display passthrough
PF pciaddr macaddr
--------------------------------------------------
0 0000:03:00.0 80:48:c9:00:00:02
Table 1 Command output
Field
Description
PF PF ID of the physical NIC.