H3C MSR 810 - Autostart VM; Backup VM

5
Related commands
display vminterface
autostart vm
Use autostart vm to enable auto-start for a VM.
Use
undo autostart vm to disable auto-start for a VM.
Syntax
autostart vm vm-name
undo autostart vm vm-name
Default
Auto-start is disabled for a VM.
Views
VMM view
Predefined user roles
network-admin
Parameters
vm-name: Specifies a VM by its name. The vm-name argument is a case-sensitive string of 1 to 30
characters.
Usage guidelines
If you use this command on a running VM, you must restart the VM for the configuration to take effect.
If you use this command on a stopped VM, the configuration takes effect after you start the VM.
Examples
# Enable auto-start for VM centos7.
<Sysname> system-view
[Sysname] vmm
[Sysname-vmm] autostart vm centos7
backup vm
Use backup vm to back up the images of a VM to a .vmb file in the specified path.
Syntax
backup vm vm-name backup-path
Views
VMM view
Predefined user roles
network-admin
Parameters
vm-name: Specifies a VM by its name. The vm-name argument is a case-sensitive string of 1 to 30
characters.
backup-path: Specifies the backup file path, a case-sensitive string of 1 to 63 characters. The file
must be a .vmb file.