H3C MSR810 - Installing the Router in a Rack

11
Figure 6 Wall-mounting the router
Installing the router in a rack
CAUTION:
The mounting brackets can support only the weight of the router. Do not place objects on the
router.
Mounting brackets and screws are provided with the RT-MSR810-10-PoE and are optional for the
other models.
The RT-MSR810-LME, RT-MSR810-LMS, RT-MSR810-LMS-EA, and RT-MSR810-LUS routers do
not support rack mounting.
To install the router in a rack:
1. Use a mounting bracket to mark the cage nut installation holes in the front rack posts, as
shown in Figure 7.
Make
sure the cage nut installation holes on the front rack posts are on a horizontal line.
≥ 1.5 mm
(0.06 in)
1
6
0
m
m
(
6.
3
0
i
n
)
1
2 3
4
5 6
≥ 22 mm
(0.87 in)