50
Appendix B LEDs
LEDs
An MSR810 router provides a RESET button for rebooting the system and restoring the factory
default settings. Press the RESET button for a short time to reboot the router. Press the RESET
button for more than 4 seconds to reboot the router and restore the factory settings.
RT-MSR810
Figure 53 Front panel LEDs
(1) GE port yellow LED (2) GE port green LED (3) System status LED (SYS)
(4) Micro SD card LED (5) VPN status LED (6) SFP port LED
RT-MSR810-W
Figure 54 Front panel LEDs
(1) GE port yellow LED (2) GE port green LED (3) 2.4G WLAN LED
(4) VPN status LED (5) System status LED (SYS) (6) Micro SD card LED
(7) SFP port LED
1 2 1 2
67
3
5
4
To Next Page
Loading...
