H3C MSR810 - Installing a 4 G Antenna

18
Figure 16 Installing an SD card
Installing a 4G antenna
Only the following routers support 4G antennas:
• RT-MSR810-LM
• RT-MSR810-LM-CNDE-SJK
• RT-MSR810-W-LM
• RT-MSR810-LM-HK
• RT-MSR810-W-LM-HK
• RT-MSR810-LM-GL
• RT-MSR810-W-LM-GL
• RT-MSR810-LME
• RT-MSR810-LMS
• RT-MSR810-LMS-EA
• RT-MSR810-LUS
No 4G antenna is provided with the RT-MSR810-LME, RT-MSR810-LMS, and RT-MSR810-LUS
routers. Purchase one yourself if required.
To install a 4G antenna:
1. Change the angle of the antenna orientation from vertical to horizontal.
2. Attach the 4G antenna to the 4G antenna port on the router. Do not over-tighten the antenna
to avoid damage.
For better signal receiving, change the antenna orientation to vertical.
1
3
2