6
Installation accessories (RT-MSR810-LME/RT-MSR810-
LMS/RT-MSR810-LMS-EA/RT-MSR810-LUS)
Figure 2 Installation accessories
The RT-MSR810-LME, RT-MSR810-LMS, and RT-MSR810-LUS routers are not shipped with 4G
antennas.
Installation tools
No installation tools are provided with the router. Prepare them yourself as required.
Figure 3 Installation tools and equipment
Pre-installation checklist
Item Requirements Result
Installation
site
Ventilation
• There is a minimum clearance of 100 mm (3.94 in)
around the air inlet and outlet vents.
• An adequate ventilation system is available at the
installation site.
Temperature 0°C to 40°C (32°F to 104°F)
Relative
• 5% to 90% (noncondensing):
Ruler Wire-stripping pliers
Rubber hammer
Heat gun
Hammer drill Marker
Diagonal pliers
Flathead screwdriver Phillips screwdriver
ESD wrist strap
To Next Page
Loading...
