8
Installing the router
WARNING!
To avoid injury, do not touch bare wires, terminals, or parts with high-voltage hazard signs.
IMPORTANT:
• The barcode on the router chassis contains product information that must be provided to local
sales agent when you return a faulty router for repair.
• Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to
open the chassis, contact H3C for permission. Otherwise, H3C shall not be liable for any
consequence.
Installation prerequisites
• You have read "Preparing for installation" carefully.
• All requirements in "Preparing for installation" are me
t.
Installation flowchart
The following installation options are available for the router:
• Workbench mounting.
• Wall mounting.
• Rack mounting.
Determine the installation method according to the installation environment. Follow the installation
flowchart shown in Figure 4 to install the route
r.
To Next Page
Loading...
