28
Startup configuration file does not exist.
Performing automatic configuration... Press CTRL_D to break.
Line con0 is available.
Press ENTER to get started.
4. Press Enter. The router is ready to configure when you see the following prompt:
<Sysname>
5. Configure basic settings for the router.
For information about configuring basic setting for the router, see Fundamentals Configuration
Guide in H3C MSR810[2600][3600] Router Series Comware 7 Configuration Guides and
Fundamentals Command Reference in H3C MSR810[2600][3600] Router Series Comware 7
Command References.
To Next Page
Loading...
