Installation Manual
H3C S1526 Smart Ethernet Switch
Chapter 2 Installation
2-10
MAIN MENU
1. Modify password
2. Set IP address/Subnet mask/Gateway
3. Reset to default configuration
4. Save current configuration
5. Modify management VLAN
0. Reboot
Enter your choice (0-5):
Select one option and enter its number after the “Enter your
choice (0-5):” to perform the configuration.
Table 2-1 Menu item description
No. Description
1 Modify the Web NMS password for the switch
2
Set the IP address, subnet mask and gateway for the
switch
3 Restore the switch to factory default settings
4 Save the current configuration
5 Configure the management VLAN
0 Reboot the switch
To Next Page
Loading...
Need help?
General
