Installation Manual
H3C S1526 Smart Ethernet Switch
Chapter 1 Product Overview
1-1
Chapter 1 Product Overview
1.1 Introduction
H3C S1526 Smart Ethernet Switch (hereinafter referred to as
the S1526) is suitable for the networking of small and medium-sized
enterprises, Internet cafe and households. It provides one console
port, 24 × 10/100Base-TX autosensing Ethernet ports and two 1000
Mbps uplink combo ports.
Note:
z Port 25 and port 26 are 1000 Mbps uplink combo ports. Each
combo port supports one 10/100/1000Base-T autosensing
Ethernet port and one 1000 Mbps SFP module port, which,
however, cannot work simultaneously. If both are enabled
simultaneously, the SFP module port, which has a higher priority,
will be active, while the 10/100/1000Base-T port will be inactive.
z For information about the technical specifications of the S1526,
refer to
Chapter 4 “Appendix – Technical Specifications”.
z For information about the port attributes of the S1526, refer to
Chapter 5 “Appendix – Port Properties”.
To Next Page
Loading...
Need help?
General
