5-49
LED status Description
Flashing green The port is sending or receiving data at 40 Gbps.
Steady yellow
A transceiver module or cable has been correctly installed. The port has a link
and is operating at 10 Gbps.
Flashing yellow The port is sending or receiving data at 10 Gbps.
Off
No transceiver module or cable has been installed or no link is present on the
port.
SFP28 port LED
Table5-4 SFP28 port LED description
LED status Description
Steady green
A transceiver module or cable has been correctly installed. The port has a link and
is operating at the maximum speed.
Flashing green The port is sending or receiving data at the maximum speed.
Steady yellow
A transceiver module or cable has been correctly installed. The port has a link and
is operating at a speed lower than the maximum speed.
Flashing yellow (3 Hz) The port is sending or receiving data at a speed lower than the maximum speed.
Off No transceiver module or cable has been installed or no link is present on the port.
SFP+ port LED
Each SFP+ port has a status LED to show port operating status and activities.
Table5-5 SFP+ port LED description
LED status Description
Steady green
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 10 Gbps.
Flashing green The port is sending or receiving data at 10 Gbps.
Steady yellow
A transceiver module or cable has been correctly installed. The port has a link and
is operating at 1 Gbps.
Flashing yellow (3 Hz) The port is sending or receiving data at 1 Gbps.
Off No transceiver module or cable has been installed or no link is present on the port.
1/10GBase-T autosensing Ethernet port LEDs
Table5-6 Description for 1/10GBase-T autosensing Ethernet port LEDs
LED status Description
Steady green The port has a link and is operating at 10 Gbps.
Flashing green The port is sending or receiving data at 10 Gbps.
Steady yellow The port has a link and is operating at 1 Gbps.
To Next Page
Loading...
Need help?
General