EasyManua.ls Logo

H3C UniServer R4900 G3 Series - 25 SFF Server with any Drive Configuration

H3C UniServer R4900 G3 Series
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
84
Maximum server operating
temperature
Hardware options
any of the following drive configurations:
{ 16SFF SAS/SATA.
{ 16SFF (8SFF SAS/SATA+8SFF NVMe, or 16SFF NVMe)
without NVMe drives that have a 3.2TB capacity (or larger).
35°C (95°F)
DCPMMs.
Samsung NVMe drives.
Rear drives.
NVMe SSD PCIe accelerator module.
Rear SATA M.2 SSD.
GPU module GPU-P4-X, GPU-M4-1, GPU-T4, or GPU-MLU100-D3
in either of the following drive configurations:
{ 16SFF or 24 SFF (only SAS/SATA).
{ 16SFF or 24SFF (only NVMe or SAS/SATA+NVMe) that does
not use NVMe drives with a 3.2TB capacity (or larger).
GPU module GPU-M10-X used with any of the following drive
configurations:
{ 24SFF NVMe without NVMe drives that have a 3.2TB capacity
(or larger).
{ 16SFF with NVMe drives that have a 3.2TB capacity (or larger).
40°C (104°F)
15000 RPM HDDs and four operating fans.
10000 RPM 1.2 TB (or higher) HDDs and four operating fans.
NVMe drives, excluding Samsung NVMe drives.
Ethernet adapter IB-MCX453A-FCAT-56/40Gb-1P or
IB-MCX453A-FCAT-56/40Gb-1P-1.
GPU module GPU-M10-X used with any of the following drive
configurations:
{ 16SFF SAS/SATA.
{ 16SFF (8SFF SAS/SATA+8SFF NVMe, or 16SFF NVMe)
without NVMe drives that have a 3.2TB capacity (or larger).
45°C (113°F) None of the above hardware options or operating conditions exists.
25SFF server with any drive configuration
Use Table 26 to determine the maximum operating temperature of the 25SFF server with any drive
configuration. A maximum server operating temperature applies if the server contains any options in
its matching hardware option list.
If a single fan fails, the maximum server operating temperature drops by 5°C (41°F) and cannot
exceed 35°C (95°F).
NOTE:
All maximum server operating temperature values are provided on the basis that the fans are
installed as needed and operating correctly. For more information about fan configurations, see the
guidelines in "Installing fans."
Table 26 Temperature requirements for the 25SFF server with any drive configuration
Maximum server operating
temperature
Hardware options
25°C (77°F) GPU modules:

Table of Contents

Related product manuals