14
rate and limit the operations on logical drives performed by using RAID array configuration tools. As
a best practice t
o avoid these problems, delete logical drives from
back to front in sequence. If you
delete logical drives in the middle, wait for all the logical drives to enter normal state before
executing any other operations.
To delete a RAID array:
1. On the storage controller configuration screen as shown in Figure 22, select Array
Configuration and press Enter.
Figure 22 Storage controller configuration screen
2. On the screen as shown in Figure 23, select Manage Arrays and press Enter.
Figure 23 Array Configuration screen
To Next Page
Loading...
Need help?
General
