H3C UniServer R4900 G3 User Manual

15
3. On the screen as shown in Figure 24, select the target array and press Enter.
Figure 24 Selecting the target array
4. On the screen as shown in Figure 25, select Delete Array and press Enter.
Figure 25 Selecting Delete Array
Scanning drives and viewing drive information
1. On the storage controller configuration screen as shown in Figure 26, select Disk Utilities and
press Enter.
The storage controller starts scanning all available drives.

H3C UniServer R4900 G3 Specifications

General

Brand	H3C
Model	UniServer R4900 G3
Category	Server
Language	English