96-0012 rev G
25
June 2003
OM
PERATOR’S ANUAL
Automatic
Automatic
Pallet Changer
Pallet Changer
SYSTEM V ARIABLES
The following system (macro) variables are available for dual APC. These variable are generally read-only.
Pallet priority (#7501-#7504) and pallet status (#7601-#7604) are read-write during some conditions, but read-
only for others. For example both are read-only while the pallet is loaded. These variable are maintained in
memory during power off.
VARIABLES USAGE
#3028 Number of pallet loaded on receiver
#7501-#7504 Pallet priority
#7601-#7604 Pallet status
#7701-#7704 Part program numbers assigned to pallets
#7801-#7804 Pallet usage count
PROGRAMMING
To Next Page
Loading...