Haas Automatic Pallet Changer - Page 29

96-0012 rev G
29
June 2003
OM PERATOR’S ANUAL
Automatic
Autom a t i c
Automatic
Autom a t i c
Pallet Changer
Pallet Changer
Receiver and Pallet #1
Alignment Pins
Pallet #2
Lube/Air Panel
APC
Control Panel
Pallet Clamped Switch
Pallet Drive Pin
Top View VMC and APC
Pallet home switches
and Pin Clear switches
are under the control
panel.
Figure 1
Pallet known locations. Pallet 1 is on the receiver and engaging
the Pallet Clamped switch (Pallet must be clamped to trip this switch).
Pallet 2 is on the APC and engaging
the Pallet Home Switch under the control panel.
Alignment pin
Receiver
Pallet
Pallet Clamp Switch
Alignment Pin Receiver Bushing
Figure 2
Alignment Pin and Bushing alignment must be verified
when manually positioning a pallet on the receiver.
TROUBLESHOOTING