Table 1 Sidebar menu icons (continued)
Icon Description
Calibration
Starts a calibration.
Verification
Starts a verification.
Data Log
Shows the reading log, calibration log and verification log. Refer to Show the
recorded data on page 20.
Setup
Configures the instrument settings. Refer to Configure the instrument settings
on page 11.
Diagnostics
Shows the firmware information, instrument backup, instrument updates, signaling
information and factory service data.
Timer
Sets a timer.
Section 5 Startup
Refer to the illustrated steps that follow to supply power to the instrument and start the instrument.
The self-check will start.
10
English
To Next Page
Loading...
Need help?
General
