16
ONYX Electrostatic Discharge Simulator
5.4.3 Sub-menu 3
Backlight Adjust backlight settings OFF to 100% (10% steps)
Contrast Adjust contrast 0-100%
Beeper Set key-beep to ON/OFF. Beep sound due to a failure can not be deactivated
Set to default ONYX settings are set to default. Saved tests will NOT be reset!
English
Change display language settings to English, French, German
Auto Off
Define switch off time: OFF, 120/60/30/15 minutes
Power Off
Switch unit off
To Next Page
Loading...