Hahnel MODUS 360RT - Page 29

GB
29
Number of flashes that will activate over-temperature protection in
high-speed sync triggering mode:
Power Output Level Number of Flashes
30
40
50
60
100
200
300
500
1000
1/1
1/2 + 0.7
1/2 + 0.3
1/2
1/4 (+0.3, +07)
1/8 (+0.3, +07)
1/16 (+0.3, +07)
1/32 (+0.3, +07)
1/64 (+0.3, +07)
1/128 (+0.3, +07)
Power Output
Prompts LCD Panel
Times
Meaning
15
20
30
40
50
A failure occurs on the recycling system so that
the flash cannot fire
Please restart the flash unit. If the problem still
exists, please send this product to a maintenance
centre.
The system gets excessive heat. Please allow a
rest time of 10 min.
The voltage on two outlets of the flash tube is too
high. Please send this product to a maintenance
centre.
Some error occurred during the upgrading
process. Please use the correct firmware upgrade
method.
1/1
1/2 (+0.3, +07)
1/4 (+0.3, +07)
1/8 (+0.3, +07)
1/16 (+0.3, +07)
1/32 (+0.3, +07)
1/64 (+0.3, +07)
1/128 (+0.3, +07)
E1
E2
E3
E9
2. Other Protections
• The system provides real-time protection to secure the device and
your safety. The following lists prompts for your reference: