Haier HW100-B14979 Service Manual

3.5 Function buttons
The function buttons (Fig. 4-6) enable additional op
o-
-
tions in the selected programme before programme
starts. The related indicators are displayed.
gramme, all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
By touching the buttons, when it is in dull light, the fun-
ction is unselected; when it is in bright light, the functi-
on is selected.
4-6
3.5.1-Function button “ Delay“
3.5.2 Function button “ ”
Note: Factory settings
there is no special requirement default settings are recommended.
3.4 Detergent drawer
Open dispenser drawer,the following components can
be seen (Fig. 4-5):
3.5.3 Function button “Temp.“
4-9
4-7 4-8
1: compartment for powder or liquid detergent.
2: detergent flap slector, lift it up for powder detergent,
keep it down for liquid detergent.
3: compartment for sanitizer.
4: compartment for softner.
5: lock tab, press it down to pull out dispenser drawer
The recommendation on the type of detergents is su-
itable for the various washing temperatures, please re-
fer to the manual of detergent.
Touch
Touch
this button (Fig. 4-7) to start the programme
with a delay. End time delay could be increased in steps
6:30 means
end of programme
(add time to the original
programme time).
cycle will be in 6 hours
and 30
min-
utes.
Touch “Start/Pause” button to activate
delay. It is not applicable to programme Spin,Refresh,
the time
Eco 40-60.
Delay
I-time
time. Not all programmes can select this function. See
P12 for programs that can select this function.
different washing 8
Temp.
this button (Fig. 4-9)
4
to change the washing
temperature of the programme. If no value is illumi-
nated(the display"--") the water will not heated.
3.5.1
3.5.2
3.5.6
3.5.5 3.5.4
3.5.3
Delay
Temp.
3.5.7
Stain removal
Delay
Steam
Extra Rinse
Speed
Temp.
Note: Liquid detergent
If using liquid detergent, it is not recommended to activate the end time delay.
4-5
1
2
5
3
4
979
10

Haier HW100-B14979 Specifications

General

Door color	Black
Door hinge	Left
Motor type	Beltless
Water fill	Cold
Control type	Rotary, Touch
Display type	LED
Loading type	Front-load
Tub material	Plastic
Drum material	Stainless steel
Product color	White
Built-in display	Yes
Custom panel-ready	-
Illumination color	Blue
Appliance placement	Freestanding
Drum capacity	10 kg
Cycle time (max)	238 min
Delay start (max)	24 h
Spin-drying class	B
Maximum spin speed	1400 RPM
Noise level (spin)	69 dB
Noise level (wash)	- dB
Number of washing programs	14
Maximum washing temperature	90 °C
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
Energy efficiency scale	A to G
Power consumption (standby)	0.45 W
Water consumption per cycle	51 L
Energy consumption washing per cycle	0.512 kWh
Package depth	646 mm
Package width	653 mm
Package height	890 mm
Package weight	82000 g

Weight and Dimensions

Depth	620 mm
Width	590 mm
Height	850 mm
Weight	77000 g