Haier YR-E17 - Page 16

15
Operation
Then hour position and “ON” are ashing. Press to
adjust the timer, minus/add 1 hour a time. Keep pressing to
accelerate the adjusting speed. Press
key a second time
and then the minute position and “ON” are ashing. Press
to conrm the setting, the setting time is displayed and “ON”
will not ash. If there is no input for 10s, this setting will be
cancelled and the timer will come back to the previous state.
Timer OFF:
Press
key, it displays default for the rst time
(previous setting will be displayed if there is setting before).
Then hour position and “ON” are ashing; Press key
again, the minute position and “ON” are ashing; Press
key again, it displays default for the rst time
(previous setting will be displayed if there is setting before).
Then the hour position and “OFF” are ashing. Press to
adjust the timer, minus/add 1 hour a time. Keep pressing to
accelerate the adjusting speed; Press
key again, the
minute position and “OFF” are ashing. Press
to conrm
the setting, the setting time is displayed and “OFF” will not
ash. If there is no input for 10s, this setting will be cancelled
and the timer will come back to the previous state.
Timer ON/OFF:
Press
key, it displays default for the rst time
(previous setting will be displayed if there is setting before).