3
4. PART NAMES
Control knob
Power switch
Setting display LCD
Power receptacle
Fuse
●HAKKO FU-500
Connecting cable
connector
Robot connector
Feeder unit connector
Slide unit connector
20
●Emergency Stop
●System Error
When abnormal heating of the motor driver
is
detected, the HAKKO FU-500 will immediately
stop the feed and show this error message on
the LCD along with buzzer sound.
When a hardware error is detected,
the HAKKO FU-500 will immediately stop
the feed and show this error message on
the LCD along with buzzer sound.
Upon receiving an emergency stop command
from the robot, the HAKKO FU-500 will
immediately stop the feed and show this error
message on the LCD along with buzzer sound.
●Motor Driver Error
Motor Driver
Error
System
Error
Emergency
Stop !
Push Knob
PC interface
To Next Page
Loading...
