Hakko Electronics FX-951 - Page 23

First Edition: March 31, 2007
4-3 Power Receptacle, Power Switch and Transformer (FX-951/FH-200)
Fig. 4-3-2 Fig. 4-3-3
Assembly procedure (5)
Solder the grounding
wire.
Assembly procedure (5)
Solder the white lead wire
of the transformer.
Assembly procedure (4)
Solder the black lead wire
of the transformer.
Assembly procedures (4) and (5)
Solder the black lead wire to the terminals of
the power switch and power receptacle.