Halton KVE-WW - System Overview and General Information; General Description of Capture Jet Hoods; Inspection and Handling Recommendations; General Installation Requirements

2
Capture Jet
®
Water Wash
Operation & Maintenance & Service Manual
CJOWWM/012009/rev1/EN
GENERAL DESCRIPTION
All Halton Capture Jet
®
hood systems provide solutions for a variety of commercial foodservice ventilation applications
over virtually any cooking process. Halton’s Capture Jet
®
technology gives the most efcient system on the market. To
achieve the optimum performance from your hood system (s) please use the following guidelines provided within the
pages of this Installation, Operation, and Maintenance Manual.
In addition to this information our ofces or local representatives are available at any time to provide additional technical
support for products, applications, installation, commissioning or in any aspect that you may have.
RECOMMENDATION
Upon receipt of the Halton hood (s), inspect unit (s) immediately for any shipping damage and notify carrier immediately
if damage is found. Halton will not accept responsibility for any shipping damage. All systems are thoroughly inspected
before leaving our factories, however Halton will assist in ling a claim if needed.
GENERAL INSTALLATION
It is the responsibility of the installing contractor to see that the system installation is completed in accordance with the
project plans and specications and that it meets all specic requirements of local code ofcials. The local authority
having jurisdiction could over rule some of the installation details written in this manual. The installation shall be in
accordance with NFPA-96. All electrical systems shall be installed following local and national codes.
The owner and/or operator should be instructed in the proper operation, care and maintenance of the system.
If questions or complications should arise during the installation of the Halton hood (s) that cannot be solved using the
instructions provided please contact the Halton ofce. Halton Company, USA 1-800-442-5866, or Halton Indoor Climate
Systems, Canada 1-800-565-2981.
Note: There are no instructions contained within this manual for installation or maintenance of fan packages.
**See appropriate manufacturers manual for detailed instructions.
EXHAUST AIRFLOWS
Because the listed exhaust airows rates were established under controlled laboratory conditions, please see submittal
drawings or contact the manufacturer for exhaust air ow rates.